Turbo Timer Option

 TURBO TIMER

This popular unit is a must for any turbo diesel.

It allows the engine to run for a selected period after the ignition is switched off. This allows for the turbocharger unit to cool down to a suitable temperature before switch off. This prolongs the life of the turbocharger bearings and seals. It is particularly important in this application, since the engine is operating at or near maximum power during grinding operations.

HOW TO PROTECT YOUR TURBOCHARGER

Turbo engine manufacturers recommend that, after normal operations, their engines be idled for a few minutes to allow the turbocharger to slow down, cool and normalize while maintaining a flow of fresh engine oil to its bearings.

This routine, if followed at every switch off, will extend turbo life and significantly reduce the likelihood of premature turbo failure.

AUTOMATIC TURBO PROTECTION

The most popular and foolproof method of guaranteeing that the engine manufacturer’s recommendation is carried out every time you switch off is to fit a Turbo Timer.

Many thousands are fitted to vehicles as diverse as heavy construction equipment, tractors of tractor-trailer rigs, and personal vehicles. Some of the world's largest and most respected truck manufacturers fit Turbo Timers on their assembly lines.

A Turbo Timer is inexpensive, foolproof and fail-safe.

 NOTE: Water cooling of Turbochargers does not remove the need to idle-down.

"It is essential to maintain a clean supply of oil flowing through the Turbocharger system as a sudden interruption of oil supply may cause a malfunction to the Turbocharger. Therefore, if the engine has been operating at high load or high RPM for an extended period of time, let it idle for a few minutes prior to shutdown."

|| home|| company profile || lease equipment ||

|| used equipment || contractors|| news ||

Pre Cleaner Option

1. Angled Louvers 2. Rotor 3. Dual (2) Bearings 4. Hood	5. Discharge Port 6. Plenum Chamber 7. To engine with CLEAN AIR
The Finest Engine Intake Air Precleaners Available. Enginaire Precleaners are designed to remove most of the contaminants from the air that feeds the engine. The advantage of removing these contaminants are extended filter life, improved fuel economy and extended engine life.Turbochargers, blowers, cylinder liners, piston rings and engine oil all fail because of contamination. The ENGINAIRE precleaner is a precision manufactured product and a full range of models are available to fit most engines. Inside the Enginaire Precleaner. Free engine intake air powers the ENGINEAIRE precleaner. Incoming air is drawn through the angled louver plates, which direct the intake air to turn the stainless steel rotor which is mounted on dual precision ground heavy duty bearings. The centrifugal force caused by the spinning motion of the rotor separates the contaminants from the air, throwing them to the inner perimeter of the cover and expelling them out through the discharge port and then into the engine. The Precleaner Professionals. 1. Low initial cost. Normally payback in one (1) year or less. 2. Removes up to 87.5% of all impurities from the intake air. (Independent lab tested SAE course dust) 3. Discharge port allows directional control of the discharged contaminants. 4. Self-cleaning, maintenance-free operation. 5. Self-powered intake air-driven - no extra problem motors. 6. Ejects most of each airborne contaminants such as dust, rain, insects, snow, sand, leaves, cinders and sparks. 7. Easy Installation (normally 5 minutes or less). 8. Low profile, super good looking. 9. Corrosion resistant, durable aluminum and stainless steel. 10. Heavy-duty industrial construction. Ruggedly dependable. 11. Lifetime Warranty on body, hood & rotor against manufacturing defect or failure. 12. Two year (2) warranty on dual (2) precision ground heavy duty bearings.
Economy and Ecology. An Enginaire Precleaner can prolong the life of your air filters up to 12 times by removing airborne particles before they reach your engine's filter, plus: Cuts Costly Downtime - Up to 50% reduction Maintenance and breakdown due to dirty air is dramatically reduced. Extends Air Filter Life - Up to 12 times Pre-filters up to 99% of airborne particles. Cuts Maintenance Costs - Up to 25% reduction Less dirt in your engine, fewer parts to replace. Boosts Power - Up to 10% improved engine performance Cleaner filters maintain highest engine power potentials. Saves Costly Fuel - Up to 10% reduction Engine burns cleaner. Maintains fuel air ratio longer. Cuts Oil Consumption - Up to 15% reduction Dramatic reduction of engine grit and grime. Protects Your Engine - Up to 25% increased engine life Cleaner engines last longer.     Window Tear Off Sheets Set of (3) tear offs help to reduce crazing of Lexan windows during washing and windshield wiper operation.  Very good reports from the field as to durability and resistance to marring.  Highly recommended to protect Lexan and improve visibility.   || home|| company profile || lease equipment || || used equipment || contractors|| news ||