Quality Pre-Owned Lease Equipment

Shinn Systems currently has three machines available for rent.

Shinn Systems SC-2 mounted on a CAT 322L

CAT 322L SN 9RL01240

Hours on excavator…..4850

Shinn Systems SN 24032LCASC2

SC-2 Hours………3350

 

CAT 322L

·         Radiator recently rodded and flushed (5/2002)

·         Rebuilt drive motors (5/2002)

·         Rebuilt swing gearbox (7/2001)

·         New rails (5/2001)

·         Oil/filter change every 250 hours

·         Air Conditioning

·         No dents in excavator trim panels

 

 

Shinn Systems SC-2 equipped with the following…

·         CAT 3306 engine rated 315 HP @ 2200 RPM

·         Engine auto shutdown protection-high water temp, low oil pressure, overspeed

·         CAT 16.5 CFM Air compressor with controls

·         Heavy duty Korfund engine mounts

·         High ambient radiator with heavy duty braces

·         Denison hydraulic pump (104 GPM @ 5000 PSI, torque limited to 268 HP)

·         Funk pump drive

·         External charge filtration

·         55 gallon hydraulic reservoir with sight gage, low level warning, removable top and baffles

·         Hayden oil cooler with “Smart Valve Technology” and swirl augmentation, hinged for easy access for cleaning

·         Hydraulic oil heater system-This system is powered off of the auxiliary engine and uses a pump and a bypass valve to heat the oil in the hydraulic tank.  This system is capable of heating the oil from a temperature of 32F to 75F in less than ten minutes. 

·         Dual 5 gallon air reservoirs with drains and gage.

·         80 gallon fuel tank with low level warning, drains, vented cap, removable top

·         Gates heavy duty hose rated to 5000 PSI working pressure/20,000 PSI burst

·         Equipped with air bleed manifold system.  During hose changes, this bleed valve purges air automatically from the high pressure loop, preventing cavitation damage to pump and motor.

·         Fall on protection cage constructed of 4 X 4 X 3/8” tubing with hinged 1 X 1/8” front window grating.

·         Lexan front windows

 

Cutter Head

·         SC-2 cutter head 24” diameter, 36” long

·         40 index-able teeth and holders

·         Computer balanced before delivery to your facility

·         Gates Poly Chain GT-2 Belt Drive System

·         1” lower covers

·         1” shield construction

·         ¼ “ hydraulic motor and upper belt covers

·         Denison hydraulic motor

·         Heavy duty power coupling

 

We will perform a 500 hour inspection on this machine before delivery.  This includes…

 

·         Hydraulic system analysis using digital data acquisition equipment

·         Spectral Oil Analysis

·         Balancing of cutter head

·         Inspection of cutter head and auxiliary engine and systems

|| home|| company profile ||  models || lease equipment ||

|| used equipment || contractors|| news ||